23.5+ Ultra - Gold Series Acrylic
We redesigned the Ultra to match the new styling while maintaining exceptional wind protection and a comfortable ride. Our Ultra Gold Series acrylic windshields eliminate buffeting and provide a quieter ride.
Stand-offs, cover plates, and hardware are included with the windshield.
LRS Recurve Windshields are made from the highest optical grade acrylic and polycarbonate materials, allowing for a crystal clear look not only on the bike but for rider's view as well.
Specs:
- Width: 22"
- Thickness: (.135")
- Material - Impact Modified Acrylic
- Recurve: Yes
- Tints: Light, Medium, Dark
- Sizes: 10", 13"
Fitment:
- FITMENT: 2023-2024 Harley-Davidson CVO Street Glide (FLHXSE), 2024 Harley-Davidson Street Glide (FLHX)
Remember: LRS Recurve Windshields are made to be looked over, not though.
Install:
- Remove the factory shield using T25 Torx bit
- Remove the factory risers from the fairing using T25 Torx bit. (You must remove the bolts then pull off the cover of the fairing and unscrew the risers from the back)
- Replace the factory risers with LRS risers secured with factory hardware. The risers will only fit in one direction. There are little notches in the fairing that fit with the risers to help guide it into place.
- Place the LRS shield on the fairing
- Place the cover plate and secure one side at a time. Hand start the threads then torque to hand tight using a 3mm Allen Key/Wrench.
Download the install guide here
*All Windshields are designed and made by Long Ride Shields out of Sparks Nevada, USA.*
*All measurements are approximate. These may differ depending on material shrinkage when formed.*
This is my second shield. The first was on my 2009 Ultra Classic and was great, I would give it 8 stars of 5. This one is of the same quality and the etching is beautiful and a great touch. My only problem is the close up view of the road through the recurve is distorted. I never had that with the other shield. I love the look and quality but that is my only gripe.
I like it because it is taller and expected as I needed.
Bought the 10" medium tint.
100% better than stock and the mounting hardware is far better as well.
Some distortion but they're ment to be looked over rather than through
The 13” shield works great for me, I’m 6’1”. Blocks the wind perfectly on my ‘24 Street Glide.
My 24 H-D Street Glide CVO has 2 big issues with design. The low windshield and the hard seat. This product remedies the wind problem nicely. Pushes wing overhead when going over 45 mph. Nice job.